Replacement Parts

Replacement Parts:

Please note, as of January 2012, all parts now have limited availability, please contact us at This e-mail address is being protected from spambots. You need JavaScript enabled to view it with your needs....

NEW: 4000 Series Parts:

****Complete 4000 Series Chassis, assembled but no body (picture here) $59.95
RiggenHO no longer offers RTR cars, please contact Terry Flynn who builds cars on request and to customer spec.
You can reach Terry at This e-mail address is being protected from spambots. You need JavaScript enabled to view it or view hiw website Harden Creek
        this was the latest version of the RiggenHO chassis, please see this link for all details--many improvements...

Individual Parts:

Drop motor modified and bushed chassis...$25 with stock shaker plate, $30 with pin tube shaker plate
...standard RiggenHO chassis with the motor hole enlarged to allow the can motor to fit flush to the bottom of the chassis. Motor uprights modified to allow motor to sit lower. Rear axle holes have 0595 bushings soldered in to provide smoothest fit.

(pin tube shaker plate includes brass body pins but no body)

Picard 4000 Series Guide Flag...$12
...includes 2 piece plastic guide flag, brass 072 x 1/4 screw and nut, 24ga wire leads, braided flag material, heavy duty extra long guide pin
Click HERE for guide flag assembly instructions...

0595 Drill Blank Axle...$2.50

Custom RiggenHO .440 silicon coated sponge tires mounted on black derin hubs... $9 (blue or orange)
...these are specially made for us by Slade Brown ( This e-mail address is being protected from spambots. You need JavaScript enabled to view it )

Brass Independant Front Wheels and Axle set...$9.95...
... includes pair of BRASS tapered wheels, O rings, delrin retainers and custom axle. This front end measures 1 5/16ths and weighs 3.3 gms

-----------------------------------------------------------------------------------

Exploded Parts View......Stock repro parts and as used on RiggenHO 1000 Series


Previous Chassis
->Complete 1000 Series Chassis, assembled but no body $34.95
       (discontinued, contact us for more info)
->Complete 2000 Series Chassis, assembled but no body $38.25
       2000 Series includes hop up rear aluminum set screw wheels and hop up green arm Mabuchi can motor
       (discontinued, contact us for more info)
->Complete 3000 Series Chassis, assembled but no body (picture here) $39.95
      (discontinued, contact us for more info)

->Any chassis available unassembled for $5 less

1000 Series on left, 2000 Series on right

--RiggenHO stock Brass Chassis with Shaker Plate $14.95
(If using an aj's style "pin" guide flag assembly, you will need to ream the flag hole wider)

Great Performance Part!
--Pin Tube Shaker Plate with brass pins $9.95

 

This shaker plate has 4 short brass tubes soldered on at the location of the body mount nibs. You can easily
convert your vintage or new Riggen bodies (or any Lexan style body) for use on your Riggen chassis.
->Brass Chassis with Pin Tube Shaker Plate $19.95

Motor/Gears
->Replacement Mabuchi HT-50 motor $4.95
->NOS Mabuchi Green Arm can motor (HT-50 configuration) Fast and smooth! $5.95
--Motor Wire Clip and AFX G+ 20/8 Gear set $3.95 (includes required spacer)
->Tyco Pro pinion and crown gear set (vintage) was often used as replacement Riggen gearing...19:6 ratio $3.95
->keep on the lookout for TycoPro hop up gears in green and white...adjust your ratios to your track! Read about the Hop Up Kit in our newsletter....
     ****other contemporary gear sets work as well: Patriot, BSRT, Tomy Turbo, Wizzard Brass

Guide Flags

->Picard 4000 Series Guide Flag...$12
...includes 2 piece plastic guide flag, brass 072 x 1/4 screw and nut, 24ga wire leads, braided flag material, heavy duty extra long guide pin

Click HERE for guide flag assembly instructions...
Click HERE for the full story on the development of the guide flag

->RiggenHO reproduction "classic" Complete Guide Flag Assembly: includes plastic guide flag assembly with copper pick up wipers soldered and mounted and retainer button $9.95 (very limited supply)

also have limited supply of stock brass screw on retainer button (these were custom made for RiggenHO, are threaded and have slot for adjustment with a slotted screwdriver...$9.00



->Vintage NOS Riggen Guide Flag with BRAIDS!!! For proper restoration. $16.75
includes retainer cap and lead wire retainer



Check out the Mushroom Cap..... brass weight adds mass to the front over the flag. Replaces the small plastic guide flag retainer with a threaded hold... 2 for $10.00

Rear Wheels/Axle

->RiggenHO custom silicon sponge tires on black Delrin hubs .440 (blue or orange) $9.00
        custom made for us by Slade Brown

NEW!!->Rear Wheel and Axle set (screw on): includes pair of custom contemporary NOS aluminum double flanged wheels, stainless steel axle, 2 #080 nuts $8.95
->also available in brass with brass nuts $9.95--looks amazing with our custom brass fronts!
(out of stock)
  

We now carry WIZZARD tires for your RiggenHO chassis, please inquire for pricing and availability
(out of stock)

->Rear Wheel and Axle set (set screw): includes pair of Champion VINTAGE NOS aluminum wheels, stainless steel axle, 2 #080 grub screws and wrench $7.95
reccomended only for period restorations (axle included is thinner diameter than stock riggenho axle and therefore less tight drive train...)
->Rear Wheel and Axle set, Riggen reproduction (press on): includes pair of stock Riggen press on aluminum wheels, stainless steel axle $4.95

Front Wheels/Axle
->Stock Front Wheels and Axle set: includes pair of reproduction stock press on Riggen tapered aluminum wheels, O rings and axle. $4.95
  This front end measures 1 5/16" and weighs 1.3 gms

******--Now available as an independant front set up.***** Stock fronts have been drilled slighly larger to freely rotate
on drill blank axle and two delrin retainer caps are provided to secure wheel on axle. $5.95

 ->Brass Independant Front Wheels and Axle set: includes pair of BRASS tapered wheels, O rings, delrin retainers and custom axle. $9.95   This front end measures 1 5/16ths and weighs 3.3 gms



Front Tires

->“O” Ring rubber front tires (6 tires--black) $2.50
->“O” Ring silicon front tires, RED Silicon $.75/pair
->"O" Ring teflon front tires, WHITE Teflon $2.25/pair
          (this is a very hard compound, similar to vintage Cobramite front tires)

Spacers
->Brass Spacers: 3 assorted sizes, 2 pairs of each (total 12 spacers) $6.00
->Nylon Spacers: Tiger Nylon Spacers, package includes 8 spacers various widths $2.95
->Plastic Spacers: (repro Champion style) 2 pairs of spacers in 3 different sizes per tree, 3 trees (36 spacers total) $2.95


Painted RIGGENHO Replacement Bodies Series 100 SuperBoss Race Cars $14.95 each

->RHO 001 Porsche 917: Silver, Red, Blue, Orange *****as of November 2007, sold out---thats it and we have no more--none clear, no more will be made...*****
->RHO 002 Hot Rod Truck: Green, Gold, Red, Blue limited colors left...(GOLD ONLY)
->RHO 003 Four Engine Dragster: Pink, Gold, Green, Blue
->RHO 004 Blown Bug: Yell, Black, Green, Orange w white hood detail and sil engine

NEW!!Painted Replacement Bodies Series 2000 Aerodynamic Race Cars $14.95
2005 Porsche 917 (early version)--available in Blue, Green, Red (sold out), and Yellow

2006 McLaren GT--available in Blue, Green, Red and Yellow $14.95

RiggenHO 2007 Ferrari 612, RiggenHO 2008 McLaren M8 $14.95 (2 for 1 special--untrimmed)
  

*****These two body styles are only offered untrimmed, and are on a 2 for 1 special until we sell out...

Riggen Model Racing Collectors Poster $7.95 tube shipped
This poster was originally published in 1998 by Brookedan Publishing and includes pictures of almost all the original Riggen Boss HO Series cars and Mr. Hot Rod Truck Series trucks.

More interesting VINTAGE replacement parts here...

Contact RiggenHO Model Racing for more information and ordering.