Chassis
--Complete 1000 Series Chassis, assembled but no body (in pic on left) $34.95
       (discontinued, contact us for more info)
--Complete 2000 Series Chassis, assembled but no body (in pic on right) $38.25
       2000 Series includes hop up rear aluminum set screw wheels and hop up green arm Mabuchi can motor
       (discontinued, contact us for more info)
--Complete 3000 Series Chassis, assembled but no body (picture here) $39.95
--Any chassis available unassembled for $5 less

--Brass Chassis with Shaker Plate $14.95
(If using an aj's style "pin" guide flag assembly, you will need to ream the flag hole wider)

Great Performance Part!
--Pin Tube Shaker Plate with brass pins $9.95

This shaker plate has 4 short brass tubes soldered on at the location of the body mount nibs. You can easily
convert your vintage or new Riggen bodies (or any Lexan style body) for use on your Riggen chassis.
--Brass Chassis with Pin Tube Shaker Plate $19.95

Motor/Gears
--Replacement Mabuchi HT-50 motor $4.95
--NOS Mabuchi Green Arm can motor (HT-50 configuration) Fast and smooth! $5.95
--Motor Wire Clip and AFX G+ 20/8 Gear set $3.95 (this is a vintage part, includes required spacer)
--Tyco Pro pinion and crown gear set (vintage) was often used as replacement Riggen gearing...19:6 ratio $3.95
-------keep on the lookout for TycoPro hop up gears in green and white...adjust your ratios to your track! Read about the Hop Up Kit in our newsletter....
     ****other contemporary gear sets work as well: Patriot, BSRT, Tomy Turbo, Wizzard Brass


Guide Flag
--Complete Guide Flag Assembly: includes plastic guide flag assembly with copper pick up wipers soldered and mounted and retainer button $9.95



--Vintage NOS Riggen Guide Flag with BRAIDS!!! For proper restoration. $16.75
includes retainer cap and lead wire retainer


New PIN Style Guide Flag $9.95--(requires the chassis guide flag hole to be reamed wider, not reversible!)
more details here.... (currently out of stock, a new guide flag is being designed...)



Check out the Mushroom Cap..... brass weight adds mass to the front over the flag. Replaces the small plastic guide flag retainer with a threaded hold... 2 for $10.00

Rear Wheels/Axle
NEW!!--Rear Wheel and Axle set (screw on): includes pair of custom contemporary NOS aluminum double flanged wheels, stainless steel axle, 2 #080 nuts $8.95
-----also available in brass with brass nuts $9.95--looks amazing with our custom brass fronts!

We now carry WIZZARD LAW tires for your RiggenHO chassis, please inquire for pricing and availability

--Rear Wheel and Axle set (set screw): includes pair of Champion VINTAGE NOS aluminum wheels, stainless steel axle, 2 #080 grub screws and wrench $7.95
reccomended only for period restorations (axle included is thinner diameter than stock riggenho axle and therefore less tight drive train...)
--Rear Wheel and Axle set, Riggen reproduction (press on): includes pair of stock Riggen press on aluminum wheels, stainless steel axle $4.95


Front Wheels/Axle
--Stock Front Wheels and Axle set: includes pair of reproduction stock press on Riggen tapered aluminum wheels, O rings and axle. $4.95
  This front end measures 1 5/16" and weighs 1.3 gms

******--Now available as an independant front set up.***** Stock fronts have been drilled slighly larger to freely rotate
on drill blank axle and two delrin retainer caps are provided to secure wheel on axle. $5.95

--Brass Independant Front Wheels and Axle set: includes pair of BRASS tapered wheels, O rings, delrin retainers and custom axle. $9.95   This front end measures 1 5/16ths and weighs 3.3 gms



Tires

--Silicon rubber "No Tear" style rear tires (sold in pairs) $1.50--choice of BLACK, ORANGE, BLUE, YELLOW, GREEN
(on our Aluminum screw on rims, these measure .458) (no longer in stock, email if you really need these...)
--“O” Ring rubber front tires (6 tires--black) $2.50
--“O” Ring silicon front tires, RED Silicon $.75/pair
--"O" Ring teflon front tires, WHITE Teflon $2.25/pair
          (this is a very hard compound, similar to vintage Cobramite front tires)

Spacers
--Brass Spacers: 3 assorted sizes, 2 pairs of each (total 12 spacers) $6.00
--Nylon Spacers: Tiger Nylon Spacers, package includes 8 spacers various widths $2.95
--Plastic Spacers: (repro Champion style) 2 pairs of spacers in 3 different sizes per tree, 3 trees (36 spacers total) $2.95


Painted RIGGENHO Replacement Bodies Series 100 SuperBoss Race Cars $14.95 each

--RHO 001 Porsche 917: Silver, Red, Blue, Orange *****as of November 2007, sold out---thats it and we have no more--none clear, no more will be made...*****
--RHO 002 Hot Rod Truck: Green, Gold, Red, Blue limited colors left...(red and blue sold out)
--RHO 003 Four Engine Dragster: Pink, Gold, Green, Blue
--RHO 004 Blown Bug: Yell, Black, Green, Orange w white hood detail and sil engine

NEW!!Painted Replacement Bodies Series 2000 Aerodynamic Race Cars $14.95
2005 Porsche 917 (early version)--available in Blue, Green, Red (sold out), and Yellow

Riggen Model Racing Collectors Poster $7.95 tube shipped
This poster was originally published in 1998 by Brookedan Publishing and includes pictures of almost all the original Riggen Boss HO Series cars and Mr. Hot Rod Truck Series trucks. For more COLLECTOR information about the original Riggen HO scale cars, see the Toybaron.com website


More interesting VINTAGE replacement parts here...

Contact RiggenHO Model Racing for more information and ordering.

Back to RiggenHO Model Racing Home